Monitor Scantool Data

Monitor Scantool Data

1. Check status
(1) IGN "ON" & Engine "OFF"
(2) Monitor the "ECM KEY and Smartra Status" Parameter on the Scantool.
A. Specification : 'LEARNT'




Fig.1) This data show that 3 keys have been taught, ECU has been learnt, Key in key cylinder has been learnt and SMARTRA3 has been learnt.
(3) Have both the ECM and KEY status been learnt ?
YES
- Substitute with known good "virgin" transponder and go to "Component Inspection" Procedure.
NO
- Go to "Component Inspection" Procedure.