Scantool Diagnostics

Monitor Scantool Data

1. Connect scantool to data link connector (DLC)
2. Engine "ON".
3. Select "D RANGE" and drive vehicle
4. Monitor the "TORQUE CONVERTER (DAMPER) CLUTCH" parameter on the scantool.

Specification : TCC SLIP <160 RPM (In condition that TCC SOL. DUTY >80%)





























Fig 1) P,N
Fig 2) "R"
Fig 3) "D 1st" gear
Fig 4) "2nd" gear
Fig 5) "3rd" gear
Fig 6) "4th" gear
Fig 7) "5th" gear
5. Is TCC SLIP" within specifications?