Clutch Pedal Assembly: Adjustments

ADJUSTMENT

NOTE:
- Check for the ignition lock switch.
In case of clutch lock system vehicle, there is an additional switch.
- Before adjusting, remove the driver's floor seat.

1. After loosening the ignition lock switch nut, move it back until it has no contact with the clutch pedal arm.(In case of clutch lock system vehicle, repeat this step with its additional ignition lock switch).
2. Check for the specification below.

Specification:
Clutch pedal stroke(A) - 145mm(5.7087in)
Clutch pedal free play(B) - 13mm(0.5118in)
Clutch pedal distance(C) - 234.7mm(9.2401in





3. (Clutch lock system vehicle)
Fix the additional ignition lock switch when its signal is ON pressing the pedal slowly 112 - 118 mm (4.4 - 4.6 in).
Tighten the bolts in the specified pattern.

TORQUE:
8 - 10Nm (0.8 - 1.0kgf.m, 5.9 - 7.4lb-ft)