Component Inspection

Visual/Physical Inspection

1. Check immobilizer lamp circuit
(1) Ignition "ON" & Engine "OFF".
(2) Check if immobilizer lamp operates properly.

NOTE:
Right after ignition "ON", Immobilizer lamp lights up for 30 sec. If lamp blinks 5 times after ignition "ON", a fault exists in immobilizer system.

(3) Is immobilizer lamp operates properly?






Component Inspection

1. Check immobilizer lamp.
(1) IG KEY OFF.
(2) Connect SMARTRA connector and disconnect PCM connector.
(3) Ground indicator terminal of PCM harness connector with wire.
(4) IG KEY ON & Engine "OFF".

Specification : Immobilizer lamp "ON"









(5) Is the Immobilizer lamp "ON"?