Scantool Diagnostics

Monitor DTC Status

NOTE:
If there are DTCs of A/C Pressure Sensor, Power Steering Pressure Sensor, Variable Charge Motion Actuator and Tank Pressure Sensor together, check power line first. Those sensors own power line jointly.

1. Connect GDS and select "DTC Analysis" mode
2. Click "DTC Status" on the menu bar to see DTC's information.
3. Confirm that "DTC Readiness Flag" indicates "COMPLETED". If not, drive the vehicle within conditions noted in the freeze frame data or enable conditions.
4. Read "DTC Status" parameter.




5. Is parameter displayed "History (Not Present) fault"?

NOTE:
- History (Not Present) fault : DTC occurred but has been cleared.
- Present fault : DTC is occurring at present time.