Repair Procedures

REMOVAL

1. Release the parking brake.
2. Remove the wheel & tire assembly.




3. Remove the wheel speed sensor bolt (A) and parking brake wire (B) from the carrier.




4. After loosening the bolts (A), remove the caliper assembly (B) from the carrier assembly and suspend it with wire.








5. Remove the brake disc (A).




6. Remove the rear axle hub mounting bolts (A).








7. Using the special tool (09432-11000), remove the tone wheel.




8. Remove the carrier assembly.
9. After unstaking the flange nut, remove the nut.




10. While supporting the flange area of the bearing outer race, press out the rear axle hub.




11. Using the special tool (09432-11000), remove the bearing inner race from the axle hub.




12. Using the special tools (09453-33000B, 09545-21100), remove the 2 bushings from the carrier.