System Inspection

System Inspection

1. Check intake/exhaust system for blockage
(1) Visually/physically inspect the following items:
- Air cleaner filter element for excessive dirt or for any foreign objects
- Hoses of intake system for blockage
- Throttle body inlet for damage or for any foreign objects
- Throttle plate for carbon deposits
(2) Has a problem been found in any of the above areas?
YES
- Repair it and go to "Verification of Vehicle Repair" procedure
NO
- Clear DTC and Test-drive under enable conditions above-mentioned. After the test, If this DTC is set, go to "Inspection & Repair" procedure. If not, troubleshooting is completed.