Mirrors: Service and Repair

REPLACEMENT

OUTSIDE REAR VIEW MIRROR REPLACEMENT

NOTE:
- When removing trim components that require prying, use a suitable trim tool, not a screwdriver. Gently pry on the component to avoid damage.
- Put on gloves to protect your hands.

1. Remove the quadrant inner cover (A).




2. After disconnecting the connector (A), remove the outside rear view mirror (B).




3. Installation is the reverse of removal.

INSIDE REAR VIEW MIRROR REPLACEMENT
1. Push the inside rear view mirror base (A) down to remove to inside rear view mirror assembly (B).




2. Installation is the reverse of removal.

ECM MIRROR REPLACEMENT
1. Remove the ECM mirror cover (A).




2. Remove the cover and connector (B).
3. Push the ECM mirror base down to remove the ECM mirror assembly (A).




4. Installation is the reverse of removal.