Shifter A/T: Service and Repair

COMPONENTS






REMOVAL

1. Remove the center console cover(A).




2. Remove the center console(A).




3. Disconnect the sports mode connector(A).




4. Disconnect the control cable(A).




5. Remove the shift lever assembly(A) (Bolt : 4EA)






INSTALLATION

1. Installation is the reverse of removal.

INSPECTION

1. Adjusting method for T/M control cable
(1) Set room side lever and T/M side lever to "N" position.
(2) Connect room side lever and shift cable.
(3) Connect T/M side lever to cable in a following orders.
A. Push cable lightly in direction of arrow shown to eliminate FREE PLAY of cable.
B. Tighten adjusting nut(C).




(4) After adjusting according to (2)-(4), verify that A/T shift lever can be properly moved to each gear position.