Front Seat

COMPONENTS






REPLACCEMENT

SEAT ASSEMBLY REPLACEMENT
1. Remove the seat assembly mounting cover (A).
2. After loosening the seat assembly mounting bolts and nuts, remove the seat assembly (B).




3. Disconnect the connector (A), and remove the seat assembly.




4. Installation is the reverse of removal.

CAUTION:
SEAT MOUNTING BOLT INSTALLATION PROCEDURE
- Set the into the most rearward position.
Check then each slide is locked, and then Tighten the front mounting bolt temporarily.




- Set the seat into most forward position.
Check that each slide is locked, and then Tighten the rear mounting bolt completely.




- Set the seat into the most rearward position.
Check the front mounting bolt completely.




- Check that the seat operates to and fro smoothy and the locking portion locks properly.






RECLINER COVER REPLACEMENT
1. Remove the cover (A).




2. Loosen the recliner mounting screw and clip, then remove the recliner cover (A).




3. Loosen the mounting screw, then remove the cover (A).




4. Installation is the reverse of removal.

SEAT BACK COVER REPLACEMENT
1. Remove front seat assembly.
2. Remove the recliner cover.
3. After disconnecting the scuff band (A), remove the seat back panel (B).




4. Disconnect the protector (A) from the back frame.




5. Disconnect the connector (A).




6. Remove the headrest and headrest guide (A).




7. After removing the hog-ring clips (A) on the front of seat back remove the seat back cover (B).




8. Installation is the reverse of removal.

SEAT CUSHION COVER REPLACEMENT
1. Remove front seat assembly.
2. Remove the recliner cover.
3. Disconnect the connector (A).




4. Disconnect the protector (A).




5. After removing the hog-ring clip (A) on the front of seat cushion and remove the seat cushion cover (B).




6. Installation is the reverse of removal.

SEAT BACK FRAME REPLACEMENT
1. Remove the following items.
A. Recliner cover.
B. Seat back panel.
C. Headrest guide.
D. Seat back cover.
2. Remove the pad (A) from frame (B).

NOTE:
- Remove the side air bag for replacing side air bag installation seat.
- Be fore service, be fully aware of precautions and service procedure relevant to air bag.




3. Installation is the reverse of removal.

SEAT TRACK REPLACEMENT
1. Remove the recliner cover.
2. Remove the seat cushion cover.
3. Remove the seat track (A).




4. Installation is the reverse of removal.

SEAT BACK HEATER REPLACEMENT
1. Remove the seat back cover.
2. Seat back pad replacement (A).




3. Installation is the reverse of removal.

SEAT CUSHION HEATER REPLACEMENT
1. Remove the seat back cover.
2. Seat cushion pad replacement (A).




3. Installation is the reverse of removal.