Rear Door Panel: Service and Repair

Notice: There is no stand alone Rear Door Panel article authored by the manufacturer. This information was extracted from the Rear Door Removal article.

Front Door Panel Removal and Installation

1. Remove door frame inner cover.
1. Remove door inner cover fasteners (2).




2. Remove door frame inner cover.

2. Remove door inner handle cover.




1. Remove cover and screw.

3. Remove ashtray.




1. Remove ashtray from door trim.
2. Disconnect ashtray lamp connector.

4. Remove door trim.
1. Remove door handle pad.




2. Remove door trim screws(3).
3. Disconnect door trim connector.



5. Loosen the door trim mounting screws. Release the clips that hold the door trim, then remove the door trim by pulling it upward. Disconnect the power window switch connector, power mirror connector, and door courtesy lamp connector (if applicable).

6. Installation is the reverse of removal.