Cylinder Head

Note: "Head Bolts are Reusable"

Cylinder Head

Using 8 mm and 10 mm hexagon wrench, install and tighten the 10 cylinder head bolts and plate washers, in several passes, in the sequence shown.

Tightening torque :

M10 22.6 - 26.5 N-m (2.3 - 2.7 kg-m, 16.6 - 19.5 lb-ft) + 60° ~ 65° + 60° ~ 65°
M12 27.5 - 31.4 N-m (2.8 - 3.2 kg-m, 20.3 - 23.1 lb-ft) + 60° ~ 65° + 60° ~ 65°