General Information

Component Location





General Description

Crankshaft Position Sensor (58X) derives its name from the fact that current systems utilize a Crankshaft Position Sensor, coupled with a 58-tooth crankshaft wheel, to determine crankshaft angular position. Each edge of the wheel corresponds to a change in crank sensor output voltage as a tooth edge passes the sensor. The sensor will produce 58 pulses with one rotation of the crankshaft.

DTC Description

Checking output signals from CKPS every 7.8 secs. under detecting condition, if an output signal is missing or redundant for more than 1.56 secs., PCM sets P0336. MIL (Malfunction Indication Lamp) turns on when the malfunction lasts till consecutive 2 driving cycle.

DTC Detecting Condition





Specification





Schematic Diagram





Signal Waveform