Component Inspection

Component Inspection

1. Check OCV
(1) Connect scantool and IG "ON"
(2) Select "OCV" on the Actuation Test
(3) Activate "OCV" by pressing "STRT (F1)" key
(should hear a faint click from Oil Control solenoid Valve)
(4) Repeat this procedure 4 or 5 times to ensure intake valve control solenoid reliability.




(5) Has a problem been found ?
YES
1) Substitute with a known-good CVVT and check for proper operation.
If the problem is corrected, replace CVVT and go to "Verification of Vehicle Repair" procedure.
NO
1) Substitute with a known-good OCV and check for proper operation.
If the problem is corrected, replace OCV and go to "Verification of Vehicle Repair" procedure.