Component Inspection

Component Inspection

1. Visually check CKPS and target wheel
(1) IG "OFF"
(2) Check CKPS and target wheel for deformation or damage visually
(3) Is the above items normal ?
YES
1) Go to "Verification of Vehicle Repair" procedure.
NO
1) Substitute with a known-good PCM and check for proper operation. If the problem is corrected, replace PCM and go to "Verification of Vehicle Repair" procedure.

CAUTION: There is a memory reset function on scantool that can erase optional parts automatically detected and memorized by PCM. Before or after testing PCM on the vehicle, use this function to reuse the PCM on the others