Front Door Panel: Service and Repair

Notice: There is no stand alone Front Door Panel article authored by the manufacturer. This information was extracted from the Front Door Removal article.

Front Door Panel Removal and Installation




1. Remove door quadrant inner cover.




2. Remove door inner handle cover.

3. Remove door trim.




1. Remove arm rest.




2. Remove door trim fastener and screws(4).




3. Remove door trim.




4. Disconnect door trim connector.

4. Loosen the door trim mounting screws. Release the clips that hold the door trim, then remove the door trim by pulling it upward. Disconnect the power window switch connector, power mirror connector, and door courtesy lamp connector (if applicable).

5. Installation is the reverse of removal.