Crash Pad Replacement

CRASH PAD REPLACEMENT

NOTE:
- When removing trim components that require prying, use a suitable trim tool, not a screwdriver. Gently pry on the component to avoid damage.
- Put on gloves to protect your hands.




1. Remove the following items.
- Front seat.
- Cluster facia panel, cluster.
- Audio assembly.
- Glove box.
- Side cover, center under cover.
- Front pillar trim.

2. Remove the photo sensor (A).
3. Disconnect the passenger's air bag connector. Loosen the bolts and nuts, then remove the crash pad (B).
4. Installation is the reverse of removal.

NOTE:
- Make sure the crash pad tits onto the guide pins correctly.
- Before tightening the bolts, make sure the crash pad wire harnesses are not pinched.
- Make sure the connectors are plugged in properly, and the antenna lead is connected properly,
- Enter the anti-theft code for the radio, then enter the customer's radio station presets.