Trunk / Liftgate Interior Trim Panel: Service and Repair

TRUNK TRIM

REMOVAL AND INSTALLATION
1. Remove rear transverse trim.




1. Remove fasteners (3).




2. Remove rear transverse trim.

2. Remove rear seat cushion.




1. Release seat cushion stopper.
2. Remove seat cushion.

3. Remove rear seat back.




1. Remove bolts (4).

Tightening torque :17 - 26 N.m (1.7 - 2.6 kg.m, 12 - 19 lb.ft)

2. Remove seat belt from belt guide.




3. Release seat back stopper, and then remove seat back.

4. Remove luggage side trim.
1. Remove trunk lid weather strip.




2. Remove screws (3) and fasteners (9).
3. Remove luggage side trim from trunk.




5. Install in reverse order of removal.
When installing trunk lid weather strip, the painting mark of weather strip and the "V" - shaped groove of body flange should meet.