Installation

Rear Stabilizer Bar

INSTALLATION

1. Install the bushing on the stabilizer bar.

NOTE: After matching the bushing (D) in the inside of the white painted part (A) on the stabilizer bar (C), install the assembly.





2. Install the bracket ( B) on the bushing (D).
3. Tighten the components below to the specified torque as follows.

Rear stabilizer bar mounting bracket bolts (A): 17 - 26 Nm (170 - 260 kgf-cm, 13 - 19 lbf-ft) Rear stabilizer bar link mounting nut (B): 35 - 45 Nm (350 - 450 kgf-cm, 26 - 33 lbf-ft)