Transaxle Gear Oil Level Replacement

TRANSAXLE GEAR OIL LEVEL
REPLACEMENT
1. With the vehicle parked on a level surface, remove the drain plug.
2. Drain the transaxle oil after loosening the drain plug (A).





3. Install the drain plug with new washer.
Drain plug tightening torque: 60 - 80 Nm (600 - 800 kgf-cm, 43 - 58 ft. lbs.)
4. Add new oil through the filler plug hole and, fill it just below the plug opening.
Standard oil SAE 75W/85, API GL-4
Oil capacity: 1.9 liter (2.0 US qt, 1.67 Imp qt)