Wiper Motor: Service and Repair

FRONT WIPER MOTOR

REMOVAL

1. Disconnect negative battery cable.
2. Remove wiper arms and blades.




3. Remove nuts and fasteners from cowl vent.




4. Remove wiper motor and link assembly.
1. Disconnect wiper motor harness connector.
2. Remove two bolts from wiper motor and link assembly.
3. Separate motor assembly from wiper link assembly.

5. Remove three wiper motor mounting bolts from wiper motor and link assembly.

INSTALLATION
1. Install three wiper motor mounting bolts on wiper motor and link assembly.




2. Install wiper motor and link assembly.
1. Attach wiper motor ball joint to wiper link assembly.
2. Install and tighten two mounting bolts.
3. Connect wiper motor harness connector.




3. Place cowl vent in position and install nuts and fasteners.
4. Connect negative battery cable.