Enhanced Testing

P0202 - Injector Circuit/Open: Cylinder 2






General Description
Based on information from various sensors, the ECM measures the fuel injection amount. The fuel injector is a solenoid-operated valve and the fuel injection amount is controlled by length of time the fuel injector is held open. The ECM controls each injector by grounding the control circuit. When the ECM energizes the injector by grounding the control circuit, the circuit voltage should be low (theoretically 0V) and the fuel is injected. When the ECM de-energizes the injector by opening control circuit, the fuel injector is closed and circuit voltage should momentarily peak.

DTC Description
If the Surge voltage of cylinder 2 is lower than the threshold value, the ECM determines that a fault exists and a DTC is stored.

Detecting Condition and Specifications





Wiring Schematic





Signal Waveform