Antilock Brakes / Traction Control Systems: Specifications

SPECIFICATIONS (ABS&TCS)

TIGHTENING TORQUE (ABS&TCS)
Sensor mounting bolt on the brake plate
Front 8 - 10 Nm (80 - 100 kg-cm, 5.6 - 6.9 ft. lbs.)
Rear 8 - 10 Nm (80 - 100 kg-cm, 5.6 - 6.9 ft. lbs.)
Hydraulic & electronic control unit mounting damper screw; 8 - 10 Nm (80 - 100 kg-cm, 5.6 - 6.9 ft. lbs.)
Hydraulic & electronic control unit mounting bracket bolt; 17 - 25 Nm (170 - 250 kg-cm, 12 - 18 ft. lbs.)
Six brake tubes on the Hydraulic Unit
(M10) 13 - 17 Nm (130 - 170 kg-cm, 9 - 12 ft. lbs.)
(M12) 19 - 23 Nm (190 - 230 kg-cm, 14 - 17 ft. lbs.)
Air bleeder 7 - 9 Nm (70 - 90 kg-cm, 5 - 6.6 ft. lbs.)

TIGHTENING TORQUE (ESP)
Steering wheel nut 40 - 50 Nm (400 - 500 kg-cm, 28.9 - 36.9 ft. lbs.)
Yaw-rate & lateral acceleration sensor bolt; 8 - 10 Nm (80 - 100 kg-cm, 5.6 - 6.9 ft. lbs.)
Master cylinder pressure sensor 26 - 30 Nm (260 - 300 kg-cm, 18.8 - 21.6 ft. lbs.)
Airbag module mounting bolt 8 - 11 Nm (80 - 110 kg-cm, 5.6 - 7.0 ft. lbs.)