Second Brake End Play Adjustment

SECOND BRAKE END PLAY ADJUSTMENT





Replace the pressure plate of the second brake with the special tool(09456 - 39100), and then install the brake disc and brake plate as shown in the figure. Install the return spring(c), second brake piston(A) and snap ring(B).
Standard value: 0.79 - 1.25mm(0.0311 - 0.0492inch)





To obtain a reference value, select a pressure plate whose thickness is within the following value. [A (moving amount) + thickness of the special tool - 1.25(0.0492)] to [A (moving amount) + thickness of the special tool - 0.79(0.0311)].