Disassembly

DISASSEMBLY





1. Remove the dust cover(A) with a flat - tipped ( - ) screwdriver(B).





2. Open the dust cover and wipe off grease in the insulator.





3. Using the Special Tool (J38402, A-50), compress the coil spring(A) until there is only a little tension of the spring on the strut.

NOTE:
- When compress the coil spring, do not use an impact gun.





4. Under the condition of fixed strut(A) on the vise(B), remove the front strut self - locking nut(C).
5. Remove the insulator, spring seat, coil spring and dust cover from the strut assembly