Rear

5 DOOR

Rear window wiper motor

Removal
1. Disconnect the negative battery cable.




2. Disconnect the wiper arm. Refer to "Windshield Wiper/Washer System".
3. Remove the rear hatch trim. Refer to "Trim".
4. Remove the three mounting bolts.
5. Disconnect the wiper motor harness connector.




6. Remove the wiper motor from the door.

Installation
1. Attach wiper motor ball joint to wiper link assembly.
2. Install and tighten tour wiper motor mounting bolts.

Tighten mounting bolts to 12 - 15 lb.ft (16 - 20 N.m, 1.6 - 2.0 kg.m)

3. Connect wiper motor harness connector.
4. Connect negative battery cable.