Radiator Cooling Fan Motor: Service and Repair

REMOVAL
1. Disconnect the ground cable from battery cable.
2. Disconnect the connectors from the fan motor and the harness from shroud.
3. For vehicles with automatic transaxle, remove the oil cooler hose from the shroud.





4. Remove the shroud mounting four bolts.
5. Remove the shroud with the fan motor.
6. Remove the fan mounting clip and detach the fan from fan motor.
7. Remove the three screws and detach the fan motor.

INSTALLATION





1. Installation is in the reverse order of removal procedures.

CAUTION:
1) Make sure the cooling fan does not come into contact with the shroud when installed.
2) After installation, make sure there is no unusual noise or vibration when fan is rotated.