Rear Buckle Assembly

REMOVAL

1. Pull safety belts to rear through seats.
2. Remove rear seat cushion.
3. Remove one bolt from rear buckle assembly mounting bracket.
4. Install mounting bolt through bracket.

Tighten mounting bolt to 40 - 55 N.m (4.0 - 5.5 kg.m, 29 - 40 lb.ft)

5. Feed buckle between seatback and cushion without any twists.

INSTALLATION

1. Install retractor mounting bolt and sheet metal screw.
2. Install package tray.
3. Install C-pillar trim.




4. Install one bolt through lap belt mounting bracket.

Tighten mounting bolt to 40 - 55 N.m (4.0 - 5.5 kg.m, 29 - 40 lb.ft)

5. Install side bolster.
6. Install rear seat cushion.