Brake Hose/Line: Service and Repair

BRAKE LINE





COMPONENTS

INSPECTION
1. Check the brake tubes for cracks, crimps and corrosion.
2. Check the brake hoses for cracks, damage and leakage.
3. Check the brake tube flare nuts for damage and leakage.

INSTALLATION
1. Install the brake hoses without twisting them.
2. The brake tubes should be installed away from edges, weld beads or moving parts.
3. Tighten the connections to the specified torque.
Flare nuts: 13 - 17 Nm (130 - 170 kg-cm, 9 - 12 ft. lbs.)
Brake hose to front caliper: 25 - 30 Nm (250 - 300 kg-cm, 18 - 22 ft. lbs.)