Hood: Service and Repair
4 DOORRemoval
1. Raise hood and support with prop.
2. Support hood so it will not fall when hinges are removed.
NOTE: Have an assistant help remove hood.
3. Remove hinges from hood by removing four bolts.
4. Remove prop from hood.
5. Remove hood.
Installation
NOTE: Have an assistant help install hood.
1. Install in reverse order of removal.
2. Tighten four hinge bolts to just over finger-tight.
3. Lower and lock hood.
4. Check fit and adjust as required in accordance with illustrated specifications.
5. Check alignment of locking mechanism and hood striker and align as required.
5 DOOR
Removal
1. Raise hood and support with prop.
2. Support hood so it will not fall when hinges are removed.
NOTE: Have an assistant help remove hood.
3. Remove hinges from hood by removing four bolts.
4. Remove prop from hood.
5. Remove hood.
Installation
NOTE: Have an assistant help install hood.
1. Install in reverse order of removal.
2. Tighten four hinge bolts to just over finger-tight.
3. Lower and lock hood.
4. Check fit and adjust as required in accordance with illustrated specifications.
Tighten bolts to 13 - 19 lb.ft (18 - 26 N.m, 1.8 - 2.6 kg.m)
5. Check alignment of locking mechanism and hood striker and align as required.