Automatic Transaxle Fluid (ATF)

AUTOMATIC TRANSAXLE FLUID (ATF)

CAUTION: Place vehicle on a flat surface.

INSPECTION
1. Apply parking brake and position wheel chocks securely to prevent vehicle from rolling after roller test.
2. Warm-up engine until ATF reaches 140 - 158°F (60 - 70°C).
3. Firmly depress the foot brake, and shift the selector lever P-R-N-D-1-2-1-D-N-R-P. (stay at each range for over 3 second)





NOTE: Use COOL 68°F (20°C) range only as a rough reference.

4. Ensure that the ATF level is in HOT 149°F (65°C) range. Add ATF to specification, if necessary
ATF type: SK ATF SP-III or DIAMOND ATF SP-III