Headlamp: Description and Operation

Exterior Lights:

Headlight assembly
Headlight assembly is aerodynamically shaped to match contours of body. The headlight assembly is attached to body structure with two bolts.

This light assembly contains three bulbs: Two of the bulbs are halogen type bulbs and function as the low and high beams. The other functions as the position lights.

An O-ring seals headlight bulb inside the headlight assembly to prevent foreign matter from entering headlight assembly. Bulb can be removed/installed from inside the engine compartment without removing headlight assembly.

Each headlight can be adjusted to move beam up, down, left or right. Two adjustment screws for each headlight assembly are accessed through holes in body structure, directly above headlight assembly. The inboard screw adjusts left/right headlight beam, and the outboard screw adjusts headlight beam up/down. One bulb functions as the position light.