Cruise Control Module: Service and Repair
Removal1. Disconnect battery negative cable.
2. Disconnect cruise control cable from cruise control module.
3. Disconnect control module connector from cruise control module.
4. Remove three nuts securing control module with bracket.
5. Remove control module with bracket from engine compartment.
6. Remove three bolts attaching cruise control module to bracket.
7. Remove control module from bracket.
Installation
1. Position control module on control module bracket.
2. Install three bolts.
Tighten three bolts to 61 - 113 lb.in (7 - 13 N.m, 70 - 130 kg.cm)
3. Position control module bracket.
4. Secure control module bracket to body using two bolts and one nut.
Tighten two bolts to 61 - 104 lb.in (7 - 12 N.m, 70 - 120 kg.cm)
Tighten one nut to 15 - 19 lb.ft (21 - 36 N.m, 2.1 - 3.7 kg.m)
5. Connect control module connector.
6. Connect control cable.
7. Connect battery negative cable.