Rear Turn Signal Light

Exterior Lights:

Combination Light Assembly (Rear)
Rear combination light assembly is aerodynamically shaped to follow body contours. Lens is three-colored: amber (hazard/turn signal), translucent (backup) and red (tail/brake). Rear combination light assembly contains three bulbs. Two bulbs are single-filament and are used in hazard/turn signal and backup light circuits. Third bulb is a dual filament bulb; one filament functions as brake light and other as tail light. A plastic bulb holder mounts three lamps and associated wiring. Bulb holder can be removed from inside vehicle for bulb replacement.

Brake light bulb is turned on/off by a brake light switch mounted near brake pedal and actuated by movement of brake pedal. Refer to Brake System, for adjustment of brake (stop) light switch.

Backup light is turned on/off by a switch mounted on transaxle. When transaxle is shifted into reverse gear, switch is closed to turn on backup lights.

Hazard and turn signal bulb is controlled by combination switch installed on steering column.

Flasher unit is located under left side of instrument panel.