With Scan Tool

After-repair procedure
1. Cancel diagnostic trouble code memory by using SST(OK2CA 089 HSP).
2. Remove SST (OK2CA 089 HSP) from data link connector.





3. Drive vehicle at 31 mph (50 km/h), and depress accelerator pedal fully to activate kickdown. Stop vehicle gradually.
4. Connect SST (OK2CA 089 HSP) to data link connector.
5. Turn ignition switch to ON.
6. Verify that no diagnostic trouble codes are displayed.
7. Remove SST (OK2CA 089 HSP) from data link connector.