| Camshaft, Engine | Runout | | 0.03 Millimeter (mm) |
| Lobe Height | Standard | 42.87 Millimeter (mm) |
| | Limit | 42.868 Millimeter (mm) |
| Journal Diameter | Standard | 33.961 - 34.0 Millimeter (mm) |
| | Minimum | 26.910 Millimeter (mm) |
| | | 0.03 Millimeter (mm) |
| Carrier Bolts | | 11.2 - 14.2 Newton Meter (Nm) |
| Oil Clearance | | 0.035 - 0.081 Millimeter (mm) |
| | Maximum | 0.15 Millimeter (mm) |
| Valve Timing | IN/Open | 6 Degrees Before Top Dead Center (deg BTDC) |
| | IN/Close | 46 Degrees After Bottom Dead Center (deg ABDC) |
| | EX/Open | 46 Degrees Before Bottom Dead Center (deg BBDC) |
| | EX/Close | 6 Degrees After Top Dead Center (deg ATDC) |