Transmission Position Sensor/Switch: Testing and Inspection
Operation inspection1. Verify that the starter operates only with ignition switch in START position and selector lever in P or N position.
2. Verify that the back-up lights illuminate when shifted to R position with ignition switch in ON position.
3. Verify that the position of selector lever and shift pattern indicator of instrument cluster correspond.
4. If not as specified, check the transaxle range switch.
Continuity inspection
1. Disconnect negative battery cable.
2. Disconnect transaxle range switch connector.
3. Check for continuity at transaxle range switch.
4. If not as specified, replace or adjust transaxle range switch.
5. Connect transaxle range switch connector.
6. Connect negative battery cable.