Seats: Description and Operation

Seats:

Front seat
Front seat consists of a seat back and a cushion. Both items are replaceable or serviceable. Both seats can be reclined or adjusted front-to-rear by two levers, reclining lever and adjusting lever. Head restraint can also be adjusted or removed.

Seat adjuster lever is under right or left front corner of front seats. Pulling up this lever unlocks seat, allowing it to slide forward or backward on a track attached to vehicle floor. Track assembly and seat adjuster lock are replaceable items.

Reclining lever is placed on door side of either seat. If this lever is pulled up and pressure is placed on seatback, seatback will recline. If no pressure is applied, seat will spring forward past vertical driving position. If pressure is applied to seatback, it will recline to actual driving position and then lock. Reclining adjuster is a replaceable items.

Driver's seat is also equipped with lifter levers. This is controlled by levers on left side of driver's side seat cushion. Lifter control levers are replaceable items.

Rear seat
The rear seat consist of seatback and seat cushion. The seatback is mounted on vehicle frame by three bolts. The seat cushion is mounted on vehicle frame by two bolts.