2. Trouble Shooting Procedures

First, select the applicable malfunction symptom from the Trouble Symptom charts. Determine the condition of all function circuits.
1. Make the following preliminary inspections.
- Check that the installation of the actuator, accelerator cable are correct, and that the cables and links are securely connected.
- Check that the accelerator pedal moves smoothly.
- Adjust the cable so there is not excessive tension or excessive play on the accelerator cable.
- Check that the actuator & unit assembly, cruise main and control switch and the connector of each cancel switch are connected securely.

2. Check in the sequence indicated in the Trouble Symptom chart.
3. If these checks indicate a normal condition, replace the cruise control module.