B-Pillar Upper Trim

REMOVAL
1. Remove front and rear scuff plate.
2. Unfasten B-pillar lower trim with a trim removal tool.
3. Remove B-pillar lower trim.
4. Remove two mounting screws from belt guide.
5. Remove upper anchor mounting bolt from safety belt.
6. Remove B-pillar upper trim with a trim removal tool.

INSTALLATION
1. Position B-pillar upper trim
2. Install upper anchor mounting bolt to safety belt.

Tighten mounting bracket bolt to 25 - 33 lb-ft (35 - 45 N.m, 3.5 - 4.5 kg-m)

3. Install two screws to belt guide.
4. Position B-pillar lower trim and press B-pillar lower trim.
5. Install front and rear scuff plate.