Installation

1. Install power steering pump assembly.

2. Tighten three bracket retaining bolts.
Tightening torque: 27 - 38 ft. lbs. (37 - 52 Nm)

3. Connect fluid suction hose onto P/S pump.

4. Install high pressure hose and tighten bolt.
Tightening torque: 33 - 40 ft. lbs. (44 - 54 Nm)

5. Install drive belt.

6. Tighten bracket nut.
Tightening torque: 27 - 38 ft. lbs. (37 - 52 Nm)

7. Tighten locknut and bolt.
Tightening torque: 27 - 38 ft. lbs. (37 - 52 Nm)

8. Tighten pivot bolt.
Tightening torque: 27 - 38 ft. lbs. (37 - 52 Nm)