Rear Lap / Shoulder Belt Assembly

REMOVAL




1. Remove rear seat cushion.




2. Remove one bolt from side bolster.




3. Remove one bolt from lap belt mounting bracket.




4. Retract belt slowly as far as belt will go.




5. Remove C-pillar trim.
6. Remove one anchor bolt.




7. Fold rear seatback for the floor of body.
8. Remove package tray.
9. Remove one bolt and one sheet metal screw to attach retractor assembly.

INSTALLATION

1. Install retractor mounting bolt and sheet metal screw.

Tighten mounting bolt to
29-58 lb-ft (38-78 N.m, 3.9-8.0 kg-m)

2. Install package tray.
3. Install one anchor bolt.

Tighten anchor bolt to
29-58 lb-ft (38-78 N.m, 3.9-8.0 kg-m)

4. Install C-pillar trim.
5. Install one bolt through lap belt mounting bracket.

Tighten mounting bracket bolt to
29-58 lb-ft (38-78 N.m, 3.9-8.0 kg-m)

6. Install side bolster.
7. Install rear seat cushion.