Instrument Cluster Bulb Holders

REMOVAL

1. Locate desired bulb holder on back of instrument cluster. Bulb holders are identified by function on printed circuit board next to each bulb holder location.
2. Carefully turn bulb holder counterclockwise and remove bulb holder from instrument cluster.
3. Remove bulb from bulb holder. Some bulbs are not removable or "bulb-replaceable", and bulb holder/bulb must be replaced as a unit.

INSTALLATION

1. Plug new bulb into bulb holder. Some bulb holders and bulbs only come as a unit.
2. Insert bulb holder into instrument cluster.