Removal

1. Lift rear of vehicle and support it with safety stand.

2. Remove wheel and tire.

3. Loosen the front lateral link retaining bolt and washer from the crossmember.

4. Loosen the rear lateral link retaining bolt and washer from the crossmember.

5. Remove the lateral link pivot bolt, nut, two washers and lock-washer from spindle, then remove the two lateral links.

6. Loosen the trailing link pivot bolt from the spindle.

7. Remove the trailing link.

8. Loosen the control-link nut from stabilizer bar.

9. Loosen the control-link bolt from control link bracket of suspension assembly and remove the control link.

10. Remove the stabilizer bracket and bracket bushing after loosening the mounting bolt.

11. Remove the stabilizer bar.

12. Loosen the three crossmember bracket bolts from vehicle, then loosen one crossmember bolt from the crossmember.

13. Remove crossmember.