Antenna Cable

REMOVAL

1. Remove ashtray.




2. Remove one screw from center panel trim.
3. Pull out center panel trim.




4. Remove two screws from instrument cluster trim.




5. Remove four screws that secure radio to center panel.
6. Remove five connectors from rear of radio.
7. Disconnect antenna cable connector from antenna.
8. Remove antenna cable connector from antenna.
9. Pull carpet back toward driver seat.




10. Remove antenna cable.

INSTALLATION

Install in reverse order of removal.

Tighten antenna mast to
17-26 lb-in (2-3 N.m, 20-30 kg-cm)

Tighten antenna mount to
70-104 lb-in (8-12 N.m, 80-120 kg-cm)