With Scan Tool

Air Bag

1. Turn ignition switch ON.
2. The air bag indicator should illuminate. If it does not, see Air Bag Indicator Service.
3. The Air Bag Indicator should go out within 4 - 6 seconds. If it stays out, system is OK.
4. If Air Bag Indicator remains illuminated, there is a problem in Air Bag-Supplemental Restraint System (SRS).
5. Turn ignition switch to LOCK.
6. Locate Data Link Connector (DLC) in engine compartment and install Kia Power Scan Tool.
7. Turn ignition switch ON and record any Diagnostic Trouble Codes displayed by Kia Power Scan Tool.
8. Refer to Air Bag Diagnostic Trouble Codes Chart for fault description and actions.

Warning Light Operating Modes:
Mode 1: Warning Light will be illuminated for remainder of ignition ON cycle, but will not be illuminated during next ignition ON cycle if fault has self-corrected.
Mode 5: Warning Light will be illuminated for remainder of ignition ON cycle, but will go out right away if fault has self-corrected.