Installation

WARNING: FUEL IS EXPLOSIVE. WHEN WORKING ON FUEL SYSTEM, MAKE SURE TO SUPPLY ADEQUATE VENTILATION TO THE WORK AREA. DO NOT SMOKE, AND KEEP SPARKS AND OPEN FLAMES AWAY.

It may be necessary for transaxle assembly and other chassis brackets to be removed in order to reinstall fuel lines. If so, refer to appropriate components for removal and installation procedures.

1. Reinsert fuel lines carefully into each of six retaining brackets along undercarriage of vehicle chassis until all fuel lines have been properly positioned into place.
2. Tighten six bracket retaining screws.
3. Reconnect fuel lines/hoses.
4. Install clips to fasten fuel lines/hoses to fittings.
5. Connect negative terminal to battery cable.