Console: Service and Repair

REMOVAL

1. Remove knob from shift lever.
2. Remove center panel trim.
3. Remove two mounting screws from left side of console.
4. Repeat for right side.
5. Remove one mounting screw at middle of top of console.
6. Remove console box at rear side of console.
7. Remove two mounting bolts.
8. Remove console.

INSTALLATION

1. Position console and install five mounting screws and two mounting bolts.
2. Slide boots for shift lever over lever and mount center panel trim in position.
3. Install one mounting screw.
4. Install shift lever knob.