Installation

WARNING: FUEL IS EXPLOSIVE. WHEN WORKING ON FUEL SYSTEM PARTS, MAKE SURE TO SUPPLY ADEQUATE VENTILATION TO THE WORK AREA. DO NOT SMOKE, AND KEEP SPARKS AND OPEN FLAMES AWAY.





1. Raise vehicle.
2. Connect fuel filler pipe assembly to joint hose.
3. Install bolts to bracket attaching fuel filler pipe assembly to vehicle sub-frame.

Tightening torque: 6.5-9.3 lb-ft (8.8-12.7 N.m, 90-130 kg-cm)

4. Install splash shield, two bolts and two fasteners.

Tightening torque: 7.7-12.2 lb-ft (10.8-16.7 N.m, 1.1-1.7 kg-m)

5. Lower vehicle on hydraulic lift to ground level.





6. lnstall two upper mounting screws to fuel filler pipe assembly.

Tightening torque: 1.8-2.5 lb-ft (2.5-3.5 N.m, 25-36 kg-cm)

7. Install filler cap.
8. Close the fuel filler door.