Shift-Lock System

SHIFT-LOCK SYSTEM

WARNING: Service with engine OFF.

1. Turn the ignition switch ON.
2. Verify that the selector lever is in P range.
3. Without the brake pedal depressed, verify that the selector lever cannot be shifted from P range.





4. Depress the brake pedal. Verify that the selector lever can be shifted from P range.
5. Shift the selector lever to R range.
6. Verify that the ignition key cannot be turned to LOCK position.
7. Shift the selector lever to P range.





8. Verify that the ignition key can be turned to the LOCK position.
9. If not as specified, inspect and repair as necessary, refer to the QUICK DIAGNOSIS CHART.